IMEX.mes.wcf/WCF.Service/WCF.DataModels/PCModule/ProcedureEntity.cs

using System;
using System.Collections.Generic;
using System.Data;
using System.Linq;
using System.Runtime.Serialization;
using System.Text;

namespace Dongke.IBOSS.PRD.WCF.DataModels
{
    /// <summary>
    /// 工序模型
    /// </summary>
    [DataContract]
    public class ProcedureEntity
    {
        #region 成员
        /// <summary>
        /// 生产工序ID
        /// </summary>
        private int procedureID;

        /// <summary>
        /// 工序节点序号
        /// </summary>
        private int nodeNo;
        /// <summary>
        /// 生产线ID
        /// </summary>
        private int productionLineID;
        /// <summary>
        /// 生产工序编码
        /// </summary>
        private string procedureCode;
        /// <summary>
        /// 生产工序名称
        /// </summary>
        private string procedureName;
        /// <summary>
        /// 工序模型
        /// </summary>
        private int procedureModel;
        /// <summary>
        /// 工序模型类别
        /// </summary>
        private int modelType;
        /// <summary>
        /// 工序节点类型
        /// </summary>
        private int nodeType = 2;
        /// <summary>
        /// 必须工序
        /// </summary>
        private int mustFlag = 1;
        /// <summary>
        /// 采集模式
        /// </summary>
        private int collectType = 1;
        /// <summary>
        /// 能否报废
        /// </summary>
        private int canBroken;
        /// <summary>
        /// 特殊返工工序
        /// </summary>
        private int isSpecialRework = 0;

        //xuwei add 2019-10-14
        /// <summary>
        /// 特殊返工工序
        /// </summary>
        private int isSemireWork = 0;

        /// <summary>
        /// 所属部门
        /// </summary>
        private int organizationID;
        /// <summary>
        /// 备注
        /// </summary>
        private string remarks;
        /// <summary>
        /// 输入属性
        /// </summary>
        private List<int> processPropertyIDList = new List<int>();
        /// <summary>
        /// 生产工序流程明细
        /// </summary>
        private List<ProcedureFlowEntity> processFlowDetailList = new List<ProcedureFlowEntity>();
        /// <summary>
        /// 对应产品
        /// </summary>
        private DataTable procedureGoodsTable;
        /// <summary>
        /// 对应工号
        /// </summary>
        private DataTable procedureUserTable;
        /// <summary>
        /// 生产工序对应缺陷表(在检验工序中能检验出来的缺陷。)
        /// </summary>
        private DataTable procedureDefectTable;
        /// <summary>
        /// 缺陷对应工序工种表(产品产生这个缺陷后，是哪个工序，哪个工种产生的。)
        /// </summary>
        private DataTable defectProcedureJobsTable;

        /// <summary>
        /// 对应窑炉
        /// </summary>
        private DataTable procedureKilnTable;

        /// <summary>
        /// 工序状态0未修改 1新增工序 2删除工序
        /// </summary>
        private int procedureState;

        /// <summary>
        /// 工序漏扫排序号
        /// </summary>
        private int misspriority;

        /// <summary>
        /// 显示排序号
        /// </summary>
        private int displayno;

        /// <summary>
        /// 允许撤销
        /// </summary>
        private int unDo;

        /// <summary>
        /// 交坯模式 
        /// </summary>
        private int deliverType;
        #endregion

        #region 属性
        /// <summary>
        /// 条码打印份数
        /// </summary>
        [DataMember]
        public int BarCodePrintCopies
        {
            get;
            set;
        }

        /// <summary>
        /// 交坯模式
        /// </summary>
        [DataMember]
        public int DeliverType
        {
            get { return deliverType; }
            set { deliverType = value; }
        }

        /// <summary>
        /// 允许撤销
        /// </summary>
        [DataMember]
        public int UnDo
        {
            get { return unDo; }
            set { unDo = value; }
        }


        /// <summary>
        /// 显示排序号
        /// </summary>
        [DataMember]
        public int DisplayNo
        {
            get { return displayno; }
            set { displayno = value; }
        }

        /// <summary>
        /// 工序漏扫排序号
        /// </summary>
        [DataMember]
        public int MissPriority
        {
            get { return misspriority; }
            set { misspriority = value; }
        }

        /// <summary>
        /// 工序状态0未修改 1新增工序 2删除工序
        /// </summary>
        [DataMember]
        public int ProcedureState
        {
            get { return procedureState; }
            set { procedureState = value; }
        }

        /// <summary>
        /// 生产工序ID
        /// </summary>
        [DataMember]
        public int ProcedureID
        {
            get { return procedureID; }
            set { procedureID = value; }
        }
        /// <summary>
        /// 生产工序序号
        /// </summary>
        [DataMember]
        public int NodeNo
        {
            get { return nodeNo; }
            set { nodeNo = value; }
        }
        /// <summary>
        /// 生产线ID
        /// </summary>
        [DataMember]
        public int ProductionLineID
        {
            get { return productionLineID; }
            set { productionLineID = value; }
        }
        /// <summary>
        /// 生产工序编码
        /// </summary>
        [DataMember]
        public string ProcedureCode
        {
            get { return procedureCode; }
            set { procedureCode = value; }
        }

        /// <summary>
        /// 生产工序名称
        /// </summary>
        [DataMember]
        public string ProcedureName
        {
            get { return procedureName; }
            set { procedureName = value; }
        }

        /// <summary>
        /// 工序模型
        /// </summary>
        [DataMember]
        public int ProcedureModel
        {
            get { return procedureModel; }
            set { procedureModel = value; }
        }

        /// <summary>
        /// 工序模型类别
        /// </summary>
        [DataMember]
        public int ModelType
        {
            get { return modelType; }
            set { modelType = value; }
        }

        /// <summary>
        /// 工序节点类型
        /// </summary>
        [DataMember]
        public int NodeType
        {
            get { return nodeType; }
            set { nodeType = value; }
        }

        /// <summary>
        /// 必须工序 1：必需工序；2：非必需
        /// </summary>
        [DataMember]
        public int MustFlag
        {
            get { return mustFlag; }
            set { mustFlag = value; }
        }

        /// <summary>
        /// 采集模式 1：集中采集；2：单点采集
        /// </summary>
        [DataMember]
        public int CollectType
        {
            get { return collectType; }
            set { collectType = value; }
        }

        /// <summary>
        /// 能否报废
        /// </summary>
        [DataMember]
        public int PieceType
        {
            get { return canBroken; }
            set { canBroken = value; }
        }

        /// <summary>
        /// 特殊返工工序
        /// </summary>
        [DataMember]
        public int IsSpecialRework
        {
            get { return isSpecialRework; }
            set { isSpecialRework = value; }
        }

        //xuwei add 2019-10-14
        /// <summary>
        /// 半检返修工序
        /// </summary>
        [DataMember]
        public int IsSemireWork
        {
            get { return isSemireWork; }
            set { isSemireWork = value; }
        }
        //xuwei end

        /// <summary>
        /// 所属部门
        /// </summary>
        [DataMember]
        public int OrganizationID
        {
            get { return organizationID; }
            set { organizationID = value; }
        }

        /// <summary>
        /// 备注
        /// </summary>
        [DataMember]
        public string Remarks
        {
            get { return remarks; }
            set { remarks = value; }
        }

        /// <summary>
        /// 输入属性
        /// </summary>
        [DataMember]
        public List<int> ProcedurePropertyIDList
        {
            get { return processPropertyIDList; }
            set { processPropertyIDList = value; }
        }

        /// <summary>
        /// 生产工序流程明细
        /// </summary>
        [DataMember]
        public List<ProcedureFlowEntity> ProcedureFlowDetailList
        {
            get { return processFlowDetailList; }
            set { processFlowDetailList = value; }
        }

        /// <summary>
        /// 对应产品
        /// </summary>
        [DataMember]
        public DataTable ProcedureGoodsTable
        {
            get { return procedureGoodsTable; }
            set { procedureGoodsTable = value; }
        }

        /// <summary>
        /// 生产工序对应缺陷表(在检验工序中能检验出来的缺陷。)
        /// </summary>
        [DataMember]
        public DataTable ProcedureDefectTable
        {
            get { return procedureDefectTable; }
            set { procedureDefectTable = value; }
        }

        /// <summary>
        /// 缺陷对应工序工种表(产品产生这个缺陷后，是哪个工序，哪个工种产生的。)
        /// </summary>
        [DataMember]
        public DataTable DefectProcedureJobsTable
        {
            get { return defectProcedureJobsTable; }
            set { defectProcedureJobsTable = value; }
        }

        /// <summary>
        /// 对应工号
        /// </summary>
        [DataMember]
        public DataTable ProcedureUserTable
        {
            get { return procedureUserTable; }
            set { procedureUserTable = value; }
        }


        /// <summary>
        /// 对应窑炉
        /// </summary>
        [DataMember]
        public DataTable ProcedureKilnTable
        {
            get { return procedureKilnTable; }
            set { procedureKilnTable = value; }
        }

        /// <summary>
        /// 生产线编码 
        /// </summary>
        [DataMember]
        public string ProductionlineCode { get; set; }

        /// <summary>
        /// 生产线名称
        /// </summary>
        [DataMember]
        public string ProductionlineName { get; set; }

        /// <summary>
        /// 编辑时工序的添加标记
        /// </summary>
        [DataMember]
        public bool EditingAddFlag { get; set; }

        /// <summary>
        /// 操作时间戳
        /// </summary>
        [DataMember]
        public DateTime? OPTimeStamp
        {
            get;
            set;
        }

        /// <summary>
        /// 商标ID
        /// </summary>
        private int? logoID;

        /// <summary>
        /// 对应窑炉
        /// </summary>
        [DataMember]
        public int? LogoID
        {
            get { return logoID; }
            set { logoID = value; }
        }

        /// <summary>
        /// 条码类型
        /// </summary>
        private int barCodeFlag;

        /// <summary>
        /// 条码类型
        /// </summary>
        [DataMember]
        public int BarCodeFlag
        {
            get { return barCodeFlag; }
            set { barCodeFlag = value; }
        }
        #endregion
    }
}